Intelspy – Perform Automated Network Reconnaissance Scans

Perform automated network reconnaissance scans to gather network intelligence.
IntelSpy is a multi-threaded network intelligence spy tool which performs automated enumeration of network services. It performs live hosts detection scans, port scans, services enumeration scans, web content scans, brute-force, detailed off-line exploits searches and more.
The tool will also launch further enumeration scans for each detected service using a number of different tools.

Credits

I had started working on IntelSpy when one day I discovered AutoRecon. Instead of reinventing the wheel, IntelSpy is the result of combining/merging IntelSpy with the best features of the AutoRecon to create a network reconnaissance tool suitable for Penetration Testing engagements.

Features

• Scans multiple targets in the form of IP addresses, IP ranges (CIDR notation) and resolvable hostnames.
• Scans targets concurrently.
• Detects live hosts in an IP range (CIDR) network.
• Customizable port scanning profiles and service enumeration commands.
• Creates a directory structure for results gathering.
• Logs commands that were run.
• Generates shell scripts with commands to be run manually.
• Extracts important information in txt and markdown format.
• Stores data to an SQLite database.
• Generates HTML report.

Requirements

• Python 3
• colorama
• toml (https://github.com/toml-lang/toml)
• seclists
• curl
• enum4linux
• gobuster
• nbtscan
• nikto
• nmap
• onesixtyone
• oscanner
• smbclient
• smbmap
• smtp-user-enum
• snmpwalk
• sslscan
• svwar
• tnscmd10g
• whatweb
• wkhtmltoimage
• pandoc
• hydra
• medusa
• wpscan
• ldapsearch
• patator

pip3 install -r requirements.txt
sudo apt install seclists

Usage

 ___               __        
  |  ._ _|_  _  | (_  ._     
 _|_ | | |_ (/_ | __) |_) / 
                      |   /  

IntelSpy v1.0 - Perform automated network reconnaissance scans to gather network intelligence.
IntelSpy is an open source tool licensed under GPLv3.
Written by: @maldevel | @LOGISEK_LTD
https://logisek.com | https://pentest-labs.com
https://github.com/maldevel/intelspy


usage: intelspy.py [-h] [-ts TARGET_FILE] -p PROJECT_NAME -w WORKING_DIR
                   [--exclude <host1[,host2][,host3],...>] [-s SPEED]
                   [-ct <number>] [-cs <number>] [--profile PROFILE_NAME]
                   [--livehost-profile LIVEHOST_PROFILE_NAME]
                   [--heartbeat HEARTBEAT] [-v]
                   [targets [targets ...]]

positional arguments:
  targets               IP addresses (e.g. 10.0.0.1), CIDR notation (e.   g.
                        10.0.0.1/24), or resolvable hostnames (e.g.
                        example.com) to scan.

optional arguments:
  -h, --help            show this help message and exit
  -ts TARGET_FILE, --targets TARGET_FILE
                        Read targets from file.
  -p PROJECT_NAME, --project-name PROJECT_NAME
                        project name
  -w WORKING_DIR, --working-dir WORKING_DIR
                        working directory
  --exclude <host1[,host2][,host3],...>
                        exclude hosts/networks
  -s SPEED, --speed SPEED
                        0-5, set timing template (higher is faster) (default:
                        4)
  -ct <number>, --concurrent-targets <number>
                        The maximum number of target hosts to scan
                        concurrently. Default: 5
  -cs <number>, --concurrent-scans <number>
                           The maximum number of scans to perform per target
                        host. Default: 10
  --profile PROFILE_NAME
                        The port scanning profile to use (defined in port-
                        scan-profiles.toml). Default: default
  --livehost-profile LIVEHOST_PROFILE_NAME
                        The live host scanning profile to use (defined in
                        live-host-scan-profiles.toml). Default: default
  --heartbeat HEARTBEAT
                        Specifies the heartbeat interval (in seconds) for task
                        status messages. Default: 60
  -v, --verbose         Enable verbose output. Repeat for more verbosity (-v,
                        -vv, -vvv).

Usage Examples
Scanning single target

sudo python3 intelspy.py -p MyProjectName -w /home/user/pt/projects/ 192.168.10.15
sudo python3 intelspy.py -p MyProjectName -w /home/user/pt/projects/ 192.168.10.15 -v
sudo python3 intelspy.py -p MyProjectName -w /home/user/pt/projects/ 192.168.10.15 -vv
sudo python3 intelspy.py -p MyProjectName -w /home/user/pt/projects/ 192.168.10.15 -vvv

Scanning a hostname

sudo python3 intelspy.py -p MyProjectName -w /home/user/pt/projects/ example.com

Scanning a network range(CIDR)

sudo python3 intelspy.py -p MyProjectName -w /home/user/pt/projects/ 192.168.10.0/24

Scanning multiple targets (comma separated)

sudo python3 intelspy.py -p MyProjectName -w /home/user/pt/projects/ 192.168.10.15 192.168.10.0/24 example.com

Scanning targets from file

sudo python3 intelspy.py -p MyProjectName -w /home/user/pt/projects/ -ts /home/user/targets.txt

Excluding one host

sudo python3 intelspy.py -p MyProjectName -w /home/user/pt/projects/ --exclude 192.168.10.9 192.168.10.0/24

Excluding many hosts

sudo python3 intelspy.py -p MyProjectName -w /home/user/pt/projects/ --exclude 192.168.10.9,192.168.10.24 192.168.10.0/24