cisco

A vulnerability in Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) Mode could allow an unauthenticated, remote attacker to cause a queue wedge on a leaf switch, which could result in critical control plane traffic to the device being dropped. This could result in one or more leaf switches being removed from the fabric. This vulnerability is due to mishandling of ingress TCP traffic to a specific port. An attacker could exploit this vulnerability by sending a stream of TCP packets to a specific port on a Switched Virtual Interface (SVI) configured on the device. A successful exploit could allow the attacker to cause a specific packet queue to queue network buffers but never process them, leading to an eventual queue wedge. This could cause control plane traffic to be dropped, resulting in a denial of service (DoS) condition where the leaf switches are unavailable. Note: This vulnerability requires a manual intervention to power-cycle the device to recover.

A vulnerability in Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) Mode could allow an unauthenticated, remote attacker to cause a queue wedge on a leaf switch, which could result in critical control plane traffic to the device being dropped. This could result in one or more leaf switches being removed from the fabric. This vulnerability is due to mishandling of ingress TCP traffic to a specific port. An attacker could exploit this vulnerability by sending a stream of TCP packets to a specific port on a Switched Virtual Interface (SVI) configured on the device. A successful exploit could allow the attacker to cause a specific packet queue to queue network buffers but never process them, leading to an eventual queue wedge. This could cause control plane traffic to be dropped, resulting in a denial of service (DoS) condition where the leaf switches are unavailable. Note: This vulnerability requires a manual intervention to power-cycle the device to recover.

A vulnerability in the vDaemon process of Cisco SD-WAN Software could allow an unauthenticated, remote attacker to cause a device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient handling of malformed packets. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

Multiple vulnerabilities in the web-based management interface of the Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an attacker to do the following: Execute arbitrary code Cause a denial of service (DoS) condition Execute arbitrary commands For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the software cryptography module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker or an unauthenticated attacker in a man-in-the-middle position to cause an unexpected reload of the device that results in a denial of service (DoS) condition. The vulnerability is due to a logic error in how the software cryptography module handles specific types of decryption errors. An attacker could exploit this vulnerability by sending malicious packets over an established IPsec connection. A successful exploit could cause the device to crash, forcing it to reload. Important: Successful exploitation of this vulnerability would not cause a compromise of any encrypted data. Note: This vulnerability affects only Cisco ASA Software Release 9.16.1 and Cisco FTD Software Release 7.0.0.

A vulnerability in Cisco Webex Player for Windows and MacOS could allow an attacker to execute arbitrary code on an affected system. This vulnerability is due to insufficient validation of values in Webex recording files that are in Webex Recording Format (WRF). An attacker could exploit this vulnerability by sending a user a malicious WRF file through a link or email attachment and persuading the user to open the file with the affected software on the local system. A successful exploit could allow the attacker to execute arbitrary code on the affected system with the privileges of the targeted user.

A vulnerability in Cisco Webex Player for Windows and MacOS could allow an attacker to execute arbitrary code on an affected system. This vulnerability is due to insufficient validation of values in Webex recording files that are in Webex Recording Format (WRF). An attacker could exploit this vulnerability by sending a user a malicious WRF file through a link or email attachment and persuading the user to open the file with the affected software on the local system. A successful exploit could allow the attacker to execute arbitrary code on the affected system with the privileges of the targeted user.

A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to perform a command injection attack on an affected device. The vulnerability is due to insufficient validation of user-supplied input to a configuration command. An attacker could exploit this vulnerability by including malicious input during the execution of this command. A successful exploit could allow a non-privileged attacker authenticated in the restricted CLI to execute arbitrary commands on the underlying operating system (OS) with root privileges.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the SIP inspection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a crash and reload of an affected device, resulting in a denial of service (DoS) condition.The vulnerability is due to a crash that occurs during a hash lookup for a SIP pinhole connection. An attacker could exploit this vulnerability by sending crafted SIP traffic through an affected device. A successful exploit could allow the attacker to cause a crash and reload of the affected device.

A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a buffer overflow on an affected system. The vulnerability is due to insufficient boundary checks for specific data that is provided to the web services interface of an affected system. An attacker could exploit this vulnerability by sending a malicious HTTP request. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected system, which could disclose data fragments or cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the implementation of the Intermediate System–to–Intermediate System (IS–IS) routing protocol functionality in Cisco IOS XR Software could allow an unauthenticated attacker who is in the same IS–IS area to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of crafted IS–IS link-state protocol data units (PDUs). An attacker could exploit this vulnerability by sending a crafted link-state PDU to an affected system to be processed. A successful exploit could allow the attacker to cause all routers within the IS–IS area to unexpectedly restart the IS–IS process, resulting in a DoS condition. This vulnerability affects Cisco devices if they are running a vulnerable release of Cisco IOS XR Software earlier than Release 6.6.3 and are configured with the IS–IS routing protocol. Cisco has confirmed that this vulnerability affects both Cisco IOS XR 32-bit Software and Cisco IOS XR 64-bit Software.

A vulnerability in the Cisco IOx Application Framework of Cisco 809 Industrial Integrated Services Routers (Industrial ISRs), Cisco 829 Industrial ISRs, Cisco CGR 1000 Compute Module, and Cisco IC3000 Industrial Compute Gateway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling during packet processing. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the IOx web server on an affected device. A successful exploit could allow the attacker to cause the IOx web server to stop processing requests, resulting in a DoS condition.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of an affected device. The vulnerability is due to insufficient validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. This vulnerability is due to insufficient CSRF protections for the NX-API on an affected device. An attacker could exploit this vulnerability by persuading a user of the NX-API to follow a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the affected user. The attacker could view and modify the device configuration. Note: The NX-API feature is disabled by default.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device.

Multiple vulnerabilities in the REST API endpoint of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to view, modify, and delete data without proper authorization. For more information about these vulnerabilities, see the Details section of this advisory.